Under20g OUTRUNNER Brushless ³Ð¤¨½ñ

MicroDAN 2003-F3P
Specifications
Stator Width: 20mm
Stator Height: 3mm
# of Stator Poles: 9
# of Magnet Poles: 12
Weight: 12.1 grams
Performance
7x3.5 = 8.1oz of thrust @ 5.88a, 7.65v, 10,600rpm
4x2.5 = 5.4oz of thrust @ 4.1v, 10.8v, 20,000rpm
£Ã£Ä¥Ù¡¼¥¹¤Î²ÈÆâÀ©¼ê¹©¶È¡©


MPJet AC 22/4-xx
MJ20206 MPJet AC 22/4-90D
27mm (1-1/16") diameter, 17 grams, Kv=1300. Small and light, this motor is ideal for flying airplanes up to 200 grams (7 oz.) with a 2-cell LiPo battery. Suitable for propellers from 7x3 to 8x4. Short-term max current is 3.5 amps.

MJ20207 MPJet AC 22/4-40D
Kv=2800. Small and light, this motor is ideal for flying airplanes up to 200 grams (7 oz.) with a single LiPo cell. Suitable for propellers from 7x3 to 8x4. Short-term max current is 8 amps.

MJ20208 MPJet AC 22/4-60D
Kv=1880. Small and light, this motor is ideal for 3D airplanes up to 100 grams (3.5 oz.) or aerobatic airplanes to 150 grams (5-1/4 oz.) with a 2-cell LiPo battery. Suitable for propellers from 6x4 to 7x4. Short-term max current is 7 amps.




schnurzz
For indoor 3D-Modelle with those it on minimum weight arrives primary, in addition, achievement is demanded.
The engine is in series equipped with a titanium thread wave, in order to be able to fasten GWS Props directly with a M3-Mutter.
Weight: 18g
Performance data at 2s 480 X-cell
Tension River Number of revolutions Thrust
6,5V 9,14A 11865 rpm 354g
Receiver accessories: Propeller: GWS7x3,5 | Akku: 2x 480 x-cell | Steller: YGE 8A
¥Þ¥Ë¥å¥¨¥ë·¯¤Î¥â¡¼¥¿¡¼¡Ê¥¤¥ó¥É¥¢¥¯¥í¤Ë¤³¤À¤ï¤ê¤¢¤ê¤«¡Ë


BOOSTER 05-1700S
BOOSTER 05-KV1700T 14P - 23,5 GR 65W ARBRE COURT

Booster 05 with short shaft(S) for 2 or 3 cells lipos -
Kv 1700
Weight: 23,5 gr
Diameter: 28,4 mm
Long: 34,3 mm
Booster 05 Kv 1700
For use on light indoor:outdoor models of 110 grs
- 2 cells lipo for Micro Yak 54 type with GWS 7x3,5 APC 6x4 or max gws 8x4,3
For use on small jet ou racer park flyer of 180/200 grs
- 2 or 3 cells lipos with prop APC APC 5,5x2 6X3 or 4,7x4,7
¥¨¥ó¥¸¥§¥ë¥¹¥¸¥ã¥Ñ¥ó°·¤ÎNEW POWER MODELISME¼Ò¤Î¥ä¥¯¡¾£µ£´ £Í£é£ã£ò£ï¥Ö¥é¥·¥ì¥¹¥â¡¼¥¿¡¼ÉÕ¤­¥­¥Ã¥È¤ËÉÕ°¤ÎNEW POWER MODELISME¡¡¥Ú¥¤¥µ¥ó¥ë¥ë¡¼À߷פΥ⡼¥¿¡¼
¥¹¥Ñ¥ó£¶£°­Ñ£±£°£°g¥¯¥é¥¹¤Îµ¡ÂΤËÉÕ°¤È¸À¤¦»ö¤Ç´üÂÔ¤·¤¿¤Î¤Ë23.5g¤«¡¦¡¦»ÄÇ°
¤Ç¤â°Â¤¤¡ªÎ®Ä̤ϥ¤¥ê¥µ¥ï¡¢¥µ¥ï¥¤¤Ê¤É¶¯ÎÏ¡©
°Â¤¤¤È»×¤Ã¤¿ËܲȤΥµ¥¤¥È¤ò¸«¤Æ¤Ê¤ó¤À¤±¤É¥æ¡¼¥í¤À¤·¡¦¡¦»¨»ï¤ò¸«¤¿¤é¹ñÆâ¤Î²Á³Ê¤Ï5000±ß±Û¤·¤Æ¤Þ¤·¤¿£í¡Ê¡£¡£¡Ë£í



¥Ï¥Ã¥«¡¼A10-Motors A10-12S / A10-15S
KVÃÍ ½ÅÎÌ Å¬¹ç¥Ð¥Ã¥Æ¥ê¡¼ ·Ñ³ÅÅή ½Ö´ÖÅÅή Ŭ¹ç¥×¥í¥Ú¥é
A10-12S 2900 15g 2Li-Po 4A 6A(15ÉÃ) 6¡ß3
A10-15S 2320 15g 2Li-Po 4A 6A(15ÉÃ) 7¡ß4




Park 250 BL Outrunner Motor, 2200Kv
Ideal for 3D models 4-6 oz (115-170 g) and sport and scale models 6-12 oz (170-340 g)
Up to 55 watts
Designed for firewall mount or carbon tube mount
Integrated Prop Saver design
Extremely quiet and lightweight - just .5 ounces (14 grams)
Upgraded performance motor for indoor IPS and 180 motors
High-torque direct-drive alternative to inrunners
Includes mount, mounting hardware and 2mm gold BL connectors
High quality construction with ball bearings and hardened steel shaft
Great lightweight outrunner for small indoor foamies



CYCLON Nano Brushless Outrunner Motor
Endorsed by F3A world champion Christophe Paysant Le-Roux, these outrunner motors provide maximum power and minimum weight—a power- to- weight ratio, in fact, far above existing direct-drive motors in the range. For instance, the smallest of the group, the Nano, weighs just 15 grams, but can turn an 8-inch prop and deliver 50 watts with a 2-cell Li-Po pack.
Specs
Type: Brushless Outrunner
Bearings or Bushings: Ball Bearings
Recommended Prop Range: 7x4 to 8x3.8
RPM/Volt (Kv): 1980
Resistance (Ri): .350 ohms
Idle Current (Io): 0.46A @ 6V
Maximum Burst Current: 8A (50 watts)
Cells: 2S Li-Po
Speed Control: 8-10A Brushless
Weight: 15g (.5 oz)
Overall Diameter: 26mm (1.0 in)
Shaft Diameter: Built-in Prop Saver
Overall Length: 23mm (0.9 in)